You’ll find the Arkon/RMEQUIP Universal Fish Finder Mount is a rugged, low‑vibration solution that fits most 25 mm (1″) ball and AMPS‑pattern units, offering full 360° articulation and dual swivel points for precise alignment and glare control. Machined anodized aluminum and glass‑fiber pedestal keep weight low and stiffness high, with predictable fastener locations and tidy cable routing. It’s great for kayaks and small boats seeking durable, serviceable mounting — continue for installation tips and compatibility notes.
Some Key Takeaways
- Compatible with most fishfinders via 25 mm (1″) ball and AMPS-pattern plate for Garmin, Lowrance, Humminbird, and many radios.
- Machined anodized aluminum plate and glass-fiber pedestal deliver a lightweight, rigid mount with good corrosion resistance.
- Dual swivel points provide 360° rotation and smooth adjustable resistance for glare reduction and precise screen alignment.
- Low-vibration pedestal reduces screen blur at planing speeds and provides predictable transducer placement without hull modifications.
- Modular design and AMPS/48-hole options enable flexible mounting, tidy cable routing, and cost-effective alternative to OEM mounts.
How the RMEQUIP Mount Fits Your Electronics and Boats
When mounting electronics on small boats or kayaks, the RMEQUIP lets you position a wide range of devices precisely and securely; its 25 mm (1″) ball and APEQUIP plate accept most Garmin, Lowrance, Humminbird units and many marine radios or custom gimbal brackets. You’ll get 360° rotation and dual swivel points that simplify screen alignment and reduce glare. The AMPS-pattern plate supports tidy cable management and lets you route leads toward bilge or hatch exits. Transducer placement stays predictable when you pair the low-vibration pedestal with your hull compatibility checklist, keeping sensors stable without permanent hull modifications. It’s a reliable choice for paddlers and anglers shopping with Capture Water Adventures who need durable mounting solutions for water-based electronics and accessories, especially those using floating camera straps.
Quick Look: Build, Materials, and Key Measurements
Because the RMEQUIP blends machined aluminum with reinforced polymer, you get a rigid mounting platform without excess weight. You’ll note the anodized aluminum adapter plate (≈6.75 in × 2 in × 4 mm) and glass-fiber pedestal balance stiffness and low mass; item weight is 0.88 lb. The 48 × 4 mm holes plus four recessed 5 mm AMPS holes give predictable fastener locations for optimal mass distribution. The pedestal’s low-vibration design and anodized finish boost corrosion resistance in marine use. Measurements are compact (9 × 6 × 2 in overall; pedestal ~4.5 in tall) and technically suited to modular electronics mounting. This mount is ideal for kayak anglers and outdoor enthusiasts who want a secure way to attach camera and fishfinder gear on the water.
Installation and Adjustability: Real-World Positioning Tips
Although the RMEQUIP’s modular AMPS plate and 25 mm ball make mounting straightforward, you’ll get the best results by planning fastener locations and articulation range before drilling. Position the 4-hole AMPS base where reach, sightlines, and cable routing converge. Use the plate’s 48 holes to micro-adjust lateral placement; pick screws that clear the recessed 5 mm pockets. Set arm swivel limits to avoid over-rotation that strains cabling. Route power and transducer leads along the pedestal, zip-tie to prevent chafing and enable clean cable management. Tilt and rotate during daylight to test glare reduction from different angles before final torque. Consider pairing the mount with a compatible kayak setup to optimize on-water performance.
Performance Check: Vibration, Rotation, and Durability in Use
After you’ve set swivel limits and routed cables as recommended, check how the RMEQUIP handles vibration, rotation, and long-term wear under real conditions. You’ll notice effective vibration damping from the low-vibration pedestal and robust shaft, reducing screen blur at planing speeds. Rotational resistance is smooth and adjustable; tighten the ball and arm to lock position without slop, loosen to reposition quickly. Aluminum plate and glass-fiber pedestal show minimal fatigue after repeated adjustments and salt exposure in short tests. Fasteners hold AMPS pattern securely. For independent operators, this mount gives predictable, serviceable performance with clear maintenance intervals. This makes it a practical choice for kayak anglers seeking reliable, purpose-driven gear.
Who Should Buy It : Compatibility, Alternatives, and Value Notes
If you need a rugged, versatile mount that fits most fishfinders and marine electronics, the RMEQUIP is a strong candidate because it supports the common 25 mm/1″ ball standard and the 4-hole AMPS footprint used by Garmin, Lowrance, Humminbird, kayak units, radios and similar devices. You’ll want this if you value adjustability, low-vibration pedestal design, and an anodized aluminum AMPS splitter plate for multi-device setups. Compare price comparison versus dedicated-brand mounts; RMEQUIP often undercuts OEMs while matching function. Consider mounting alternatives like rail, flush, or RAM-ball systems if you need lower profile or lighter-weight installs. The site also sells kayaks and related outdoor gear, making it a convenient source for combined kayak and fishfinder purchases.
Some Questions Answered
Does It Include Mounting Hardware Like Screws and Bolts?
No, it doesn’t include a full set of screws and bolts for every device. You’ll get the 4-Hole AMPS adapters, adapter plate and robust shaft, but you’ll need fasteners for your specific electronics. For installation tips, verify hole sizes (4 mm and recessed 5 mm) and carry a small hardware kit. Do a compatibility check with your device’s mounting holes and bring assorted stainless screws, washers and locknuts to guarantee a secure, low-vibration fit.
Is the Mount Corrosion-Resistant for Saltwater Use?
Yes — it’s designed for saltwater compatibility but with caveats. You get anodized machined aluminum and a plastic/glass-fiber pedestal that resist corrosion; however, stainless durability is limited to included fasteners if they’re stainless (not guaranteed). For harsh marine exposure you should swap in marine-grade stainless hardware and regularly rinse with fresh water. That approach preserves function, minimizes galvanic corrosion, and extends service life under open-water conditions.
Can the Adapter Plate Be Cut or Drilled for Custom Fits?
Yes — you can drill or cut the adapter plate for custom fits, but note the drill tolerance and follow modification guidance. The anodized aluminum plate accepts holes easily; use proper carbide or cobalt bits, deburr edges, and avoid overheating to preserve anodizing. Keep clear of the recessed AMPS holes and maintain structural integrity by not removing excessive material. You’re free to modify, just document changes and test load limits afterward.
Is There a Locking Mechanism to Prevent Unintended Rotation?
Yes — you can lock rotation. You’ll use the mount’s locking mechanism and torque adjustment to secure position; tighten the adjustment knob to increase torque and prevent unintended rotation under load. The system’s friction-based lock gives precise hold while still letting you reposition when desired. For high-vibration or heavy devices, crank torque tighter or add a secondary fastener to the AMPS plate for extra security and freedom of placement.
Does the Warranty Cover Damage From Marine Vibration or Impact?
No — the warranty won’t typically cover damage from marine vibration or impact. You’ll find warranty exclusions for misuse, crashes, and environmental abuse; routine vibration-induced wear or impact damage usually falls outside coverage. Check the 2 Year Limited Warranty and any vibration testing notes to confirm thresholds. If you need rugged assurance, consider documented vibration testing results or a commercial-grade mount with explicit impact and vibration protection stated in specs.
