The STRG kayak fish finder mount gives you a heavy-duty, three-pivot aluminum swing-arm that holds chartplotters, GPS units, and radios rock-steady on kayaks, SUPs, and small boats. It uses powder-coated aluminum and stainless hardware for salt-spray resistance, offers about 11.4–12″ reach, and has a rectangular plate with pre-drilled patterns to match common brands. Installation is drill-down and permanent, so measure and seal carefully. Keep going to see specs, fit tips, and installation steps.
Some Key Takeaways
- Rugged aluminum swing-arm with stainless hardware offers solid, corrosion-resistant mounting for kayaks, SUPs, and small boats.
- Three 360° pivot points deliver precise, locked positioning and easy repositioning under load.
- Typical arm reach ~11.4–12.0″—verify required clearance and device footprint before purchase.
- Drill-down installation needs a flat deck area, proper sealing, and care to avoid misaligned templates or thin/deformable decks.
- Confirm plate hole pattern matches your fishfinder (Garmin/Lowrance/Humminbird) and check warranty/support responsiveness.
What the Strg Kayak Fish Finder Mount Is and Who Should Buy It
While designed specifically for kayaks, SUPs and small boats, the Strg Kayak Fish Finder Mount is a heavy-duty swing-arm mounting solution that lets you securely attach fishfinders, chartplotters, marine GPS units and radios to flat dashboards or decks. You’ll appreciate rugged aluminum, stainless hardware and three 360° pivot points that let you position gear for clear sightlines and easy access. For kayak integration, it’s made to fasten to flat surfaces and accept many plate patterns. Target buyers are anglers, paddlers and small-boat cruisers who want reliable, corrosion-resistant mounting that preserves mobility and fosters confident, untethered exploration. It’s an excellent choice for anyone shopping for the best portable fish finder for kayak adventures because it keeps electronics safe and accessible while paddling with a portable fish finder.
Key Specs and Compatibility to Check Before You Buy
Before you buy, check a few precise specs to make sure the mount fits your gear and boat: confirm the swing-arm length (about 11.4–12.0 inches advertised) gives the reach and clearance you need, verify the rectangular mounting plate’s pre-drilled hole patterns match your fishfinder or chartplotter, and make certain your kayak or deck has a flat area suitable for drill-down installation. You’ll also confirm plate dimensions against your device’s footprint, review listed mount compatibility for Garmin, Lowrance, Humminbird and others, and guarantee the arm and plate permit the angles and positioning freedom you want on the water. Our shop specializes in quality kayak fish finder mounts for outdoor enthusiasts and can help you choose the right option for your boat and device, including popular kayak fish finder mounts.
Real-World Performance: Stability, Corrosion Resistance, and Adjustability
When you bolt the Strg Kayak Fish Finder Mount to your deck, its heavy-duty aluminum arm and stainless hardware keep your device rock-steady even in chop and when hauling a big fish, so you won’t be constantly retightening or fighting wobble. You’ll appreciate predictable mounting torque settings that let you lock position without over-stressing plastic housings. Vibration damping is effective—readings stay stable at trolling speeds. Swivel friction adjustments hold angles under load yet let you reposition quickly for sightlines. In salt spray conditions the powder-coated aluminum and stainless fasteners resist corrosion, so you can chase open-water freedom without hardware anxiety. Many paddlers pairing this mount with quality fish finder batteries find longer outings and more reliable electronics performance.
Installation Walkthrough: Tools, Steps, and Common Fit Issues
Start by gathering the right tools so the install goes smoothly: you’ll need a cordless drill with bits (including a countersink), a set of stainless steel bolts or the supplied hardware, a torque wrench or driver with adjustable clutch, a marine-grade sealant, masking tape, a center punch or awl, and a measuring tape or straightedge. Use the mounting templates to mark holes, center-punch, then drill pilot holes. Dry-fit the rectangular plate and swing arm, adjust pivots, seal beneath base, and torque fasteners to recommended torque specs. Common fit issues: misaligned templates, thin/deformable decks, and cable routing conflicts—correct before final torque. For extended trips consider packing essential kayak gear like anchor weights and safety items to ensure a safe outing and stable anchoring anchor weights.
Pros, Cons, and Final Buying Recommendation
You’ve already got the mount aligned, sealed, and torqued—now weigh what it gives you against the trade-offs. You’ll appreciate solid mount durability: powder-coated aluminum and stainless fasteners resist salt, shock, heat, and cold, keeping electronics steady on rough water. Three pivot points deliver freedom to position chartplotters or radios precisely. Downsides: drill-down installation’s permanent footprint and occasional fit fiddling with plate hole patterns. Warranty language varies; confirm terms before buying. If you want rugged, adjustable mounting and accept a fixed install, this is a smart buy—check customer support response time for peace of mind. Kayak owners should also consider GPS speed trackers compatibility when choosing mounts.
Some Questions Answered
Can I Mount a Small Camera or Action Cam on This Plate?
Yes — you can mount a small camera or action cam on that plate. You’ll need a compatible adapter or screw kit to match the camera’s tripod thread to the plate’s pre-drilled holes for camera compatibility. Expect solid stability from the aluminum plate and stainless hardware, though you should add a vibration isolation pad or mount to reduce chatter on rough water. That combo keeps footage steady while you enjoy untethered freedom.
Is a Quick-Release Option Available for Fast Removal?
No, there isn’t a built-in quick release, but you can add one. You can retrofit a quick release or rapid detach plate between your device and the rectangular mounting plate so you’ll remove gear fast. Choose marine-grade, corrosion-resistant hardware and test torque and alignment before heading out. You’ll retain full articulation at the three pivots and still enjoy secure, repeatable positioning while giving yourself the freedom to swap electronics quickly and safely.
Will It Fit on Curved Kayak Decks Without Extra Adapters?
No — it won’t reliably fit curved kayak decks without extra adapters or modifications. You’ll need to use curved surface adhesion pads, custom shims, or flexible mounting solutions to create a stable, flush base before drilling. The rectangular plate and drill-down design expect flat surfaces, so plan for sealing, reinforcement, and corrosion-resistant fasteners. That way you’ll keep adjustability, maintain watertight integrity, and retain freedom to reposition electronics safely.
Can the Arm Support Heavier Chartplotters Over Long Trips?
Yes — you can mount heavier chartplotters for long trips if you respect the mount’s weight capacity and secure installation. You’ll want to confirm your device mass against the arm spec, use the heavy-duty drill-down mounting, and tighten all three pivot points. That maximizes long term durability against vibration, salt, and shock. With proper bolts, corrosion-resistant hardware, and routine checks, you’ll enjoy reliable, freedom-friendly performance.
Are Replacement Parts Sold Separately by Strg?
Yes — you can often get replacement parts directly from Strg; contact their support to check replacement availability for specific components. You’ll want to ask about part numbers, shipping, and whether parts are sold individually. Also confirm warranty transfers if you didn’t buy new or are transferring ownership. Keep receipts and serial numbers handy so they can verify coverage quickly and help you maintain your freedom to customize and repair on the water.
