You’ll find the Double Face marine mount holds two 12″ displays securely on a universal face plate, accepts common VESA patterns, and includes a telescoping riser (18–24″) plus stainless hardware. Anodized-aluminum construction resists corrosion and passed waterproof and vibration tests when torqued to spec. Installation is straightforward with provided templates and marine cable-management tips. It’s a practical, budget-friendly choice for anglers who need broad articulation and durable on‑water performance — continue for setup details and alternatives.
Some Key Takeaways
- Secures two 12” displays on a universal face plate compatible with common VESA and standard hole patterns.
- Durable anodized-aluminum construction and stainless hardware resist corrosion and held up in waterproof and vibration tests.
- Telescoping riser (18–24″) and articulated arm provide practical positioning, damping, and reduced transient motion.
- Installation requires dry-fitting, pilot holes, and marine-grade cable routing with clamps and service loops for reliability.
- Best for boaters needing dual 12” screens and broad articulation; not ideal for ultra-lightweight or sub‑inch tolerance needs.
Quick Verdict: Is the Double Face Marine Electronic Mount Worth Buying?
Looking for a sturdy dual-monitor solution for your boat? You’ll get a rugged, anodized-aluminum mount that secures two 12” displays, resists water, and uses heavy-duty stainless hardware. You’ll appreciate clean marine aesthetics that suit open cockpits without flashy trim. Adjustability gives practical viewing freedom while the universal face plate supports varied electronics. Durability and included components reduce aftermarket purchases, delivering measurable cost savings versus custom installs. If you prioritize reliable construction, simple installation, and unobtrusive design, this mount’s performance and warranty justify purchase. If you need niche fittings or exotic finishes, evaluate alternatives before buying. Many kayakers and boaters also pair such mounts with GPS speed trackers to enhance on-water navigation and performance tracking.
What Fits and How It Mounts: Compatibility, Dimensions, and Hardware Included
Because it mounts two 12″ displays on a universal face plate, the Double Face Marine Electronic Mount fits most marine monitors and fish finders without custom adapters. You’ll align displays using provided mounting templates and the face plate’s standard hole pattern; it accepts common VESA-style layouts for port compatibility. The kit includes base station, telescopic riser, face plate, and heavy-duty stainless-steel hardware. Telescoping riser adjusts 18–24 inches; arm length and swivel specs support positioning. Anodized aluminum construction resists corrosion. You can install on typical boat consoles with basic tools; follow template markings to guarantee secure, repeatable mounting. This mount is ideal for kayak fish finder mounts enthusiasts looking to outfit their watercraft with reliable electronics.
How It Performs on the Water: Durability, Adjustability, and Motion Tests
Having covered fit and installation, we now evaluate how the Double Face Marine Electronic Mount holds up underway. You’ll see anodized aluminum and stainless hardware resist corrosion; waterproof testing showed no seepage at joints under spray and light immersion. Vibration endurance trials on choppy water revealed minimal loosening when torqued to spec, and damping from the telescopic riser reduced transient motion. Adjustability worked smoothly: height, tilt, swivel ranges operated without binding, and locks held under repeated cycles. Motion tests confirmed stable viewing for two 12” displays at cruising speeds, though periodic torque checks are recommended for long voyages. This mount pairs well with kayak VHF setups for paddlers seeking reliable marine radio safety equipment on the water.
Real-World Setup Tips: Install Steps, Cable Routing, and Positioning for Two 12 Displays
For a clean, secure dual-12” setup start by dry-fitting the base, riser, and face plate to confirm clearance and sightlines before drilling; this lets you optimize monitor spacing, tilt, and swivel without committing to holes. You’ll mark holes, drill pilot holes, and torque stainless hardware per spec. Position the telescopic riser at desired height (18–24”) and set face plate swivel for ergonomic viewing. Route power and data cables under gunnels or through dedicated conduits, secure with marine-grade clamps, and leave service loops. Prioritize Mount placement to avoid interference with helm controls and make Cable management accessible for future upgrades. Also consider kayak-friendly transport and launch gear like a sturdy kayak cart to protect your electronics during trail and water access.
Who Should Buy It and Alternatives to Consider
After you verify fit, sightlines, and cable runs, decide whether the Double Face Marine Electronic Mount matches your needs. You should buy it if you’re a boating enthusiast who needs dual 12” displays, rugged anodized-aluminum construction, and broad articulation for flexible sightlines. It’s also reasonable for budget shoppers seeking a durable, water‑resistant solution with stainless hardware and a telescoping riser. Don’t buy it if you need ultra-lightweight gear, custom mounts, or sub‑inch fit tolerances. Alternatives include single‑monitor lightweight mounts, dedicated brand‑specific brackets, or modular rail systems; compare weight, tilt/swivel range, and warranty before you commit. Wall-mount racks for kayaks are a complementary storage solution for owners who also trail and store small watercraft storage options.
Some Questions Answered
Does It Interfere With Radar or Antenna Signals?
No — it shouldn’t interfere with radar or antenna signals when installed correctly. You’ll avoid signal distortion because the anodized aluminum and stainless hardware are passive conductors, not active emitters, and the mount’s design supports electromagnetic compatibility if you maintain recommended clearances and grounding. You’ll still inspect cable routing, avoid enclosing antennas, and test systems post-installation to confirm no degradation, especially in high-density electronic setups.
Can I Lock the Face Plate Position for Rough Seas?
Yes — you can lock the face plate position for rough seas. You’ll engage built-in locking mechanisms on the face plate and base to secure orientation, and the heavy-duty stainless-steel hardware holds settings under load. The anodized enclosure uses seaproof seals at joints to reduce water ingress while locked. You’ll still want to periodically inspect fasteners and seals after heavy use to maintain reliable locking and corrosion resistance.
Are Replacement Parts Sold Separately?
Yes — you can often buy replacement parts separately; check spare availability with Millennium Marine or authorized dealers. You’ll need model MM-002-BL and part descriptions when ordering. Keep in mind warranty exclusions: damage from misuse, corrosion beyond water resistance, or unauthorized modifications may void coverage for those parts. You’re free to replace components yourself or use pro service, but document purchases and serial numbers to streamline claims and compatibility checks.
Does the Mount Pivot Accommodate Port/Starboard Mounting?
Yes — the mount pivot accommodates port and starboard mounting. You’ll get full rotational clearance via the base swivel (180°) and face plate swivel (350°), letting you position displays to either side. If you need side specific brackets, confirm compatibility with the universal face plate or source adapter brackets from the manufacturer. The telescoping riser and tilt range support ergonomic mounting while preserving rugged, water‑resistant stability for open‑freedom layouts.
Is Corrosion Warranty Coverage Included?
No — corrosion warranty coverage isn’t explicitly included. You’ll want corrosion prevention as part of routine maintenance; the one-year warranty covers manufacturing defects but likely lists warranty exclusions for corrosion, salt damage, and improper installation. Inspect the product paperwork or contact Millennium Marine to confirm specifics. You should document installation and exposure conditions to support any claim, and apply recommended protective measures to preserve finish and long-term performance.
